Why is my theft system light blinking?

The Anti-theft Light in the dash of your car should flash periodically to show that the system is engaged and active. You have to lock the doors of the car (without it running) for the alarm to engage.


How do I stop my anti-theft light from flashing?

Look for a button that allows you to slide the physical key out of the fob. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in this position. This will signal to your car's system that you have the right key, and will enable you to bypass your car's alarm system.

How do I reset my anti-theft system?

Key
  1. Insert the key into the driver's side door lock.
  2. Turn the key once, but not all the way to unlock the door. Leave the key in this position for 40-60 seconds. ...
  3. Do this again, but turn the key in the opposite direction.
  4. Remove the key from the door, get into your Ford, and start the engine. The system should be reset.


What can trigger the anti-theft system?

The vehicle must be armed electronically to enable the alarm system) Vehicle theft: This alert occurs when tampering is detected with the vehicle's key cylinder. This can be triggered by an invalid key, screwdriver, foreign key fob or no key detected when trying to start the vehicle.

How long does it take for the anti-theft system to reset?

Leave the key there for 15 minutes; it doesn't always take that long, but it can. After that time, check to see if the anti-theft light has gone out, if one was lit up. Turn the key backward two places to the Lock position, then wait three more minutes.


How to fix Security Light Flashing Vehicle Won't Start PROBLEM SOLVED



Why is my car's security light blinking?

When the car's engine is turned off, the security light may flicker to indicate that the car's security system is still operational. A malfunction in the anti-theft system is indicated by a security light that does not turn off even when the engine is running.

Can my anti-theft system drain battery?

Some Security Systems for Cars Will Drain the Battery

The wiring to the alarm on these systems goes directly to the battery, and they will slowly take away energy from the battery. Eventually, this can lead to the failure of the battery. It generally happens later in the life of a battery.

Can anti-theft cause car not start?

It is possible that the system can trigger the car alarm or prevent the engine from running without any apparent reason. You have to shut it off if it is not working properly. The car won't return to normal operation unless you fix the issue of anti theft device car wont start.


What are symptoms of anti-theft system?

Common red flags include trouble starting, loss of ignition power, and unprovoked alarms and flashing lights. These problems can develop if a system wasn't installed by a professional with thorough electrical knowledge of your vehicle.

How much does it cost to fix my anti-theft system?

The Best in Auto Repair

The average cost for antitheft system control module replacement is between $419 and $447. Labor costs are estimated between $104 and $132 while parts are priced at $315. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location.

How long does it take for a car to reset itself?

So why is the light still on? Here's something you probably don't know: after clearing the car's computer you will need to drive for about 50 to 100 miles. As you drive your car the computer will monitor all the sensors and register the results.


How long does it take for a car alarm to reset?

Usually, the car alarm keeps going off for 20 minutes. But if your car alarm keeps going off, or will not switch off automatically after 20 minutes, it can cause a noise nuisance to your neighbors. To avoid this you should: have the alarm system serviced and repaired by a competent alarm engineer.

What are symptoms of anti-theft system?

Common red flags include trouble starting, loss of ignition power, and unprovoked alarms and flashing lights. These problems can develop if a system wasn't installed by a professional with thorough electrical knowledge of your vehicle.

How long does it take to reset Immobiliser?

You can also enter your code before turning the ignition on however once you have entered your code you then have 5 seconds to turn the ignition on in order for the immobiliser to be reset so the vehicle can be driven.
Previous question
Why can't narcissist let you go?