How do you tell if your toilet is a 10 in or 12 in rough in?

Here's how:
  1. Identify where the toilet is bolted to the floor. Look for small bolts or caps at the base of your toilet. ...
  2. Measure from the wall to the center of the toilet's base bolts. Doing so will provide you the toilet's rough-in distance.
  3. Avoid measuring from baseboards or other moldings. ...
  4. Check your work.

How do you tell if a toilet is a 10 inch rough?

Toilet Rough In Dimensions: A toilet's rough-in measurement is the space between the wall behind the toilet and the center of the waste pipe. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases.

Can you put a 12-inch rough in toilet on a 10 inch?

eHow may earn compensation through affiliate links in this story. Ideally, the toilet's rough-in should match the rough-in for your bathroom plumbing. However, even if a toilet is designed for a 10-inch rough-in, you can still install it into a space that has a 12-inch rough-in.

How do you know toilet rough in size?

The rough-in measurement of a toilet refers to the span between the wall behind the toilet and the center of the waste pipe. To measure the rough-in for your toilet, measure from the wall behind the toilet to the middle of the bolt caps (the caps holding your toilet to the floor).

What's the difference between a 10 inch rough in a 12-inch rough in toilet?

Those numbers are a measure of the distance between the wall and the center of the closet flange (aka, where the johnny bolts that secure the toilet bowl go). Most toilet bowls will work with either a 10″ or a 12″ distance, but a 10″ rough tank is slimmer to allow for the decreased distance.

how to tell the rough in of your antique toilet bowl

What does 12 inch rough in mean when installing a toilet?

“What does 12-inch rough-in mean for a toilet?” That means there is 12-inches between the center of the toilet flange to the finished back wall. This information can be found on the toilet's specification sheet.

What is the rough in for an elongated toilet?

There are elongated toilets built to fit a 10” rough-in, and some are built to fit 14”.

How far to rough in a toilet off the wall?

The standard distance from the back wall is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing. Minimum distance in front of the toilet to the facing wall or fixture is 21 inches.

Does toilet rough in size matter?

Make sure the toilet dimensions will fit your space. Start by measuring the rough-in size. This is the distance between the wall behind the toilet and the center of the drainpipe or the bolts that hold the toilet to the floor. It's best to perform this measurement before you remove the old toilet.

Should toilet flange be flush with floor?

A best practice is to install the toilet flange on top of the finished floor. If you install the toilet flange flush with the finished floor, or even below the finished floor, leak paths will form, because the flange won't be at the correct height to accept the horn at the bottom of the toilet.

How do you fix a toilet that is too far from the wall?

Method #1: Use an offset flange

Using an offset flange to shorten the distance from toilet to wall is definitely the quickest, easiest method out of the two we will be mentioning. The role of an offset flange is precisely to allow the toilet to be moved several inches, regardless of the direction.

Does toilet need to rest against wall?

A toilet can be placed anywhere there's A 4″ to 6″ waist line that leads to a septic system or city sewer system. It doesn't necessarily have to be on the wall, although 95% of toilets are on a wall. Why the wall is another story but I will give you one reason “back to back plumbing”.

Are all toilets 12 inches from wall?

The actual rough-in measurement is the distance between the center of this outlet to the wall facing the back of your toilet. Toilets are manufactured in one- and two-piece styles, and the standard measurement for both cases is a 12-inch rough-in. There are also 10-inch and 14-inch rough-ins, but these are less common.

Why is an elongated toilet better?

Elongated bowls are also considered more 'hygienic' in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.

Why is elongated toilet more comfortable?

Ease of Use

However, the longer, larger bowl shape of the elongated toilet may be more comfortable for sitting on. It may also be easier for men or children to use with less mess and has a wider area for those with mobility issues to get on and off.

Where should I face while using toilet?

The toilet seat should always be placed in such a direction that the person using it would be facing the northern or southern direction of the home.

How long should you not sit on the toilet?

Most professionals recommend spending no more time on the toilet than it takes to pass a stool. Studies have shown that the average bowel movement takes 12 seconds. Sometimes it does take longer, however, so at maximum, you should not spend more than 10 minutes on the toilet.

Should you lean forward on the toilet?

You should lean forward into a 35 degree angle instead of being up straight at 90 degrees. This is because when you need to go to the toilet, your puborectalis muscle relaxes and the rectum angle widens. The puborectalis muscle is a band that wraps around the lower rectum.

How do you cover a gap between toilet and floor?

Apply a thin, even bead of caulk around the base of the toilet to cover the gap along the floor and hide the shims. If necessary, smooth the caulk with your finger, wiping your finger clean frequently with a paper towel or a rag.

How do you move a toilet over a few inches?

To move the toilet more than just a couple of inches, you will have to demolish the concrete to access and relocate water and waste lines. Then you will have to rebuild the concrete foundation and replace the sub-flooring, flooring, and fixtures.

Can you over tighten bolts on toilet?

If you tighten it too much, you can pull the closet bolt out through the flange, ruining the flange or breaking the porcelain. DO NOT tighten it as tight as it will go, like you're building something or working on your car - you'll break the flange, chip or crack the porcelain or both.

Can I stack 2 wax rings on toilet?

You can certainly install a toilet with multiple wax rings, in fact sometimes it is necessary to make sure you don't have a leak. The most common case is when a homeowner will install a tile floor (or really any thick floor).

Should I put the wax ring on the toilet or the flange?

Place the wax ring on the closet flange, not on the toilet. Pick up the toilet and set it evenly over the closet flange, making sure the bolts come through the bolt holes in the toilet base. Fine-tune the toilet position, so it's right where you want it, then push it straight down so it smashes the wax evenly.

Does toilet flange have to be glued in the pipe?

Slide the toilet flange bolts into the new flange. Secure them with washers and nuts. There's no need to use an adhesive when installing a gasket-sealed PVC flange.

Can you put a new toilet flange over an old one?

Can you put a new toilet flange over an old one? A standard toilet flange should fit snugly into the outflow pipe and sit level with the subfloor. Installing a new one without first removing the old one will make it impossible to form a seal and keep the toilet bowl bolted securely in place.